About
These two Laser cutters are in the Laser cutting area on the 4th floor of the EDIB. These machines can be used to cut or engrave many materials. Some of these include Acrylic, Anodized Aluminum, Fiberglass, Pressboard, and more! They are compatible with any graphics software and need to be assigned speeds and power based on the material you are working with.
Here is the list of Acceptable Materials for reference when using this machine!
Training Required
- Safety Training
- TA must be present
Location
- The laser cutters are located in the Laser Cutting room on the 4th floor of the Engineering Design and Innovation Building (EDIB).
Safety Info
- Keep the lids of the machines closed when cutting.
- Laser cutters are only to be operated by Learning Factory TAs. If you need to use the laser cutters, please ask one of the TAs.
Tips and Tricks
- Make sure your file is exported as either a .dxf or Adobe Illustrator file. If you do not have Adobe Illustrator, you can request the “Adobe Creative Cloud” software for free using your Penn State account credentials.
- Please review the list of acceptable materials before bringing a part to be laser engraved.
- If you are cutting or engraving multiple graphics and using the same material, combine the graphics into one file to save on time and materials!
- If you are unsure what power and speed to set the cutters, ask one of the Learning Factory TAs.
